Please enable JS

OUR RANGE

Our range of products is constantly changing and being added to as different raw materials become available. Should you have a particular interest in an aircraft part not shown please get in touch and we will do our best to accommodate.

BEST OF BRITISH

BEST OF BRITISH - NEW


One of our all time favourites….a fantastic piece of British engineering.

Utilised from the Pegasus 105 engine (Harrier Jump Jet) this stage1 LP fan disc has been mounted on one of Extoolies designed stands and rotates freely.

The stage1 blades are alternately polished and painted gold and sit in their original titanium hub which is also polished to a mirror finish.

The stand and bearing design are both Extoolie and have been powdered coated in candy red metallic….a wonderful contrast against the polished casting and hub cap.

This outstanding piece of British engineering would grace any entrance hall or foyer….but remember, they can also live outside….they won’t rust

Approx 46 inch Diameter

Yellow Peril

YELLOW PERIL - NEW


This stage1 fan disc is up cycled from the Adour engine as fitted to the RAF Jaguar. The blades have been mirror polished, assembled back into their original hub and mounted on a new bearing to allow it to rotate.

This rotational display has then been mounted onto one of Extoolies display stands with polished casting, contrasting yellow paint work and protective rubber feet.

A really nice piece of aviation history that can be displayed on a desk top or floor mounted

Approx 21 Inch Diameter


Magic Mushroom

MAGIC MUSHROOM - NEW


This light has been designed and manufactured from CFM56-3 parts….half spinner, nose cap and HP hub shaft.

Nicely balanced, this LED spotless light can be floor or desk mounted.
The polished nose cap goes really well with the orange and white powder coated half spinner and shaft.

Available in many different colour combinations of your choice

Approx 20 Inch Diameter.


HULK LAMP

HULK LAMP - NEW


As the name suggests, this light packs a punch….finished in metallic hulk green and silver paint this light has been designed by Extoolie and is a beautifully balanced table lamp.

The base is from an RAF Tornado and supports the nose cone from an ALF502 engine….the nose cap being polished to a mirror finish to contrast the metallic green.

Spotless LED lighting provides good illumination in any setting.

Approx 18 Inch Diameter


PURPLE RAIN

PURPLE RAIN - NEW


This lamp has all the features of the Hulk Lamp, but is finished in a beautiful metallic purple, a great contrast with the polished nose cap and metallic silver paint.

Which one will you choose….why not both!!

Approx 18 Inch Diameter.


ROCKET MAN

ROCKET MAN - NEW


This piece of aviation history is part of our new range of lighting and utilises the nose cone and half spinner from the CFM56-5 engine as fitted to the Boeing 737 aircraft. The design has wonderful proportion as a standard lamp.

Finished in magnificent candy red metallic and cream paintwork, all bolts are mirror polished as is the nose cone.

We use spotless LED lighting under the lip of the half spinner for a warm natural light…ideal for reading or just back ground lighting.

Approx 24 inch Diameter, 56 inch’s Tall


Magic Mushroom

ROCKET MAN'S LITTLE BROTHER - NEW


Another light designed by Extoolie utilising parts from the CFM56-5…namely the half spinner and nose cone. The base is a conical support from the same engine.

Finished in wet anthracite with a lovely contrast of orange on the nose cone, this light also features spotless LED fitted under the lip of the half spinner and is designed to illuminate floor space.

A great addition to many room settings and quite a talking point.

Approx 24 inch Diameter


ORANGE DAHLIA

ORANGE DAHLIA - NEW


This piece of aviation art features a stage 2 LP fan from the RAF Jaguar Adour engine, made from titanium and polished to show its true beauty.
The orange paint and polished blades are a really nice contrast, the orange centre cap covering the new bearing that allows the fan disc to rotate.

Together with the Extoolie designed stand this piece would look great in any location of the home or office

Approx 20 inch Diameter


HIGH PRESSURE HAWK

HIGH PRESSURE HAWK - NEW

From the heart of the Adour jet engine, both Hawk and Jaguar, this high pressure hub would have carried turbine blades used to increase pressure prior to ignition with the fuel mix. Finished in anodized bronze and silver, the hub now sits on one of Extoolies highly polished cast bases and rotates freely.

A beautifully slim and elegant table that would lift any room.

Approx 18 inch Diameter


SUNFLOWERS

SUNFLOWERS


A new range of display stands that offer maximum impact of our fan discs yet take up minimum space in your chosen setting.

This display is of a stage1 fan disc from the ALF502 engine borrowed from our Cadbury Blue table. Total height 56 Inches, depth from wall is 22 Inches and overall width is 40 Inches. Powder coated these elegant stands are finished off with one of our polished castings and have rubber feet attached to prevent movement.

Available in many different sizes to accommodate different fan discs including Jaguar Adour stage1/2 LP discs, Harrier Pegasus HP discs, Harrier Pegasus LP1,2 and 3 discs and many more.

We are able to supply as a static or rotational display…..the Sunflower range can be designed around your requirements.


737 HEAVY

737 HEAVY


A stage 1 fan hub from a CFM56-3 engine used to power the 737 aircraft. Available mounted on a rotating base designed and produced in-house.

A beautiful contrast of a gun metal metallic finish and mirror polished titanium nuts & bolts.

12mm toughened glass fitted as standard.

Approx 24 inch diameter.


PINK TIPS

PINK TIPS


A little different to the rest of our collection….Pink Tips is constructed from the wing tips of an RAF Tornado aircraft. Built as a tripod the wing tips sit on a stage 5 stator ring and are topped off using a support diaphragm - both of which are from the RB199 Tornado engine.

A lovely contrast of pink berry and silver paint work, stainless steel bolts and fittings…a tall, elegant table suited to any background.

Approx 12 inch diameter.


GREY FIN

GREY FIN


Another aircraft panel table built using access panels from the tail fin of the Tornado aircraft. Really nicely balanced this medium height table utilises a Tornado diaphragm, topped off with 12mm toughened glass.

Finished in dark grey gloss with contrasting stainless steel panel screws.

Approx 12 inch diameter.


TONKA

TONKA


Recycled from the Tornado aircraft RB199 engine, this stage 2 stator ring sits elegantly above a mirror base which reflects the blades at their best.

Mounted on one of our tulip bases and fitted with 12mm toughened glass.

Approx 32 inch diameter.


IRON MAN

IRON MAN

IRON MAN


This table always draws a crowd at our trade shows…one of the most complimented pieces we make. Utilising a stage 1 fan and intermediate casing from the Adour engine as used in the Red Arrows Hawk aircraft.

Designed by us the modified intermediate casing sits on one of our polished cast aluminium bases that we manufacture whilst the 27 fan blades are mirror polished and mounted on their original hub.

All fittings and bolt heads are polished then the glass top is bolted to the rotating disc.

A simple and wonderful piece of engineering that we give another lease of life to.

Approx 24 inch diameter, rotating.


IRON MANS BROTHER

IRON MANS BROTHER


Details of this beautiful purple velvet metallic table are identical to Iron Man accept for its colour…..which one will you choose?

The metallic paint work sets this pair of tables aside in any environment and creates quite a talking point being from the Red Arrows Hawk Adour engine


V2500 BLADE SCULPTURE

V2500 BLADE SCULPTURE


This blade was was once in service in a V2500 engine as used in the Airbus A320.

The wonderful contours of the blade have been mirror polished. Destined for the scrap pile due to it being timed out, this wide chord blade which is fabricated and not cast, is mounted on one of our in house designed bases and is a wonderful contrast with the high gloss metallic copper paint work.

Blade sculptures can look great on a table, hearth or floor….quite a statement piece.

Approx 24 inches tall.


YOU'VE BEEN TANGO'D

YOU'VE BEEN TANGO'D


One of our favourite designs. Simple, bold and very comfortable.

Made from the high pressure casings from the CFM56-3 engine, this highly polished titanium casing provides a beautiful contrast with the orange paint work and seat.

Designed in-house, the horse shoe base and top turn this aviation element into a very welcoming chair, fit for any setting.


img

THE KINGS TABLE


A magnificent piece of British engineering from the Rolls Royce Pegasus 105 engine (Harrier Jump Jet). The blades have beautifully detailed “Christmas tree roots” where they meet the hub….made from titanium, mirror polished and contrasting gold….the fan disc sits on a No1-2 bearing housing which in turn is carried by a polished base ring…topped off with 12mm toughened glass.

A real talking point with an endless history…who doesn’t know the Harrier Jump Jet?

Approx 46 inch diameter.


THE PURPLE ONE

THE PURPLE ONE


Taken from the ALF502 engine which has was fitted to the BAE146 aircraft, this high pressure compressor has been stripped, polished and painted in a vibrant purple velvet metallic.

A very unique table designed by us, sitting on a beautifully polished cast aluminium base. All 315 compressor blades have been pain stakenly hand polished to a mirror finish.

A small compact table that over flows with precision engineering.

Approx 16 inch diameter.


RB211-535 BLADE SCULPTURE

RB211-535 BLADE SCULPTURE


Even larger than the V2500 blade is the RB211-535 blade which was used to power the Boeing 757.

Powder coated in teal, this blade sits on a grey plate which in turn graces one of our cast aluminium bases.

As with all our blade sculptures we use bi hexagonal aircraft bolts to secure the base plates. These are made from titanium, are again highly polished and add that certain elegance to our pieces.

Approx 28 inches tall.


CADBURY BLUE

CADBURY BLUE


A stage one fan disc from an ALF502 engine, polished and powder coated in Cadbury Blue.  Can be supplied as shown or mounted on its original No 1 / No 2 bearing support as a rotating table or as a static wall display.

12mm toughened glass fitted as standard for the rotating table option.

Approx 42 inch diameter.


UMPER LUMPER

UMPER LUMPER


Another beautifully engineered fan assembly destined for the scrap pile.

A rotating table designed by ExToolie, this repurposed stage 1 fan is from the ALF 502 (City Jet).  Each blade has been meticulously polished to a mirror finish and mounted into its original hub which in turn rotates on the No 1 and No 2 bearing assembly.

Sitting on one of our polished base castings, the whole assembly is topped off with 12 mm toughened glass, captivated by the original nose cone and cap.

Finished in metallic orange with contrasting polished bolts and base, this is a real eye catcher.

Approx 42 inch diameter.

TITANIC

TITANIC


Introducing our newly designed ice bucket aptly named….Titanic. 
Manufactured from the 1/2 spinner and cap as fitted to the CFM56-3. The cap has been highly polished and modified to allow easy access to the stainless steel ice bowl that sits inside the spinner.

The ice bucket can be produced in a colour of your choice which will be a perfect contrast against the mirror polished cap and balance bolts on the peripheral edge.

A must for any Champagne connoisseur.

Approx 22 Inch Diameter


AFTERNOON TEA

AFTERNOON TEA


The slender design of Afternoon Tea makes it a perfect addition to any room.

Constructed from a CFM56-3 stage1 hub disc and shaft, mounted on an Extoolie designed support and polished base, this table is finished in RAL2003 orange with contrasting mirror polished bolts.

Topped off with 12mm toughened glass this aircraft piece works really well with our HP casing chairs(You’ve Been Tango’d).

Also available in beautiful gun metal grey metallic.

Approx 24 Inch Diameter.



TIFFANY

TIFFANY


This chair design uses the CFM 56-3 high pressure casing from the Boeing 737 aircraft.

Our design incorporates one half of the original casing to which we add our top and bottom castings and new seat bracket.  It’s as though this part was meant to be a chair … powder coated almond with contrasting teal and polished castings.  The polished bi-hexagonal bolts and nuts are a beautiful contrast against the paintwork.

And it’s very comfortable !


RHUBARB & CUSTARD

RHUBARB & CUSTARD


Repurposed from a CFM56-3 this stage 1 fan disc has been stripped and powder coated in vivid pink and contrasting cream. It has then been mounted onto its original No1/2 bearing support which sits on a purpose built engine stand designed by Extoolie.

A magnificent statement piece just over 5 feet in diameter this rotating fan can be supplied as a table, wall art or a real eye catching office foyer/entrance guardian.

All bi hexagonal bolts are mirror polished, as are the original oil feeder pipes.

This highly desirable fan disc can be produced in many colours to suit your requirements, please contact us for details.


ADDRESS

WORCESTERSHIRE, UK - VIEWING BY APPOINTMENT

CALL US

07967 802433

Made in UK